|
Thomas Enterprises, Inc.
13859 Buffalo Road
Anamosa Iowa 52205
The Thomas Hydraulic Pro Bow Press is new at
Select Archery. I have been searching for a bow press to
offer you that is affordable, heavy duty and can press most bows
out there...I have found that in the Thomas Hydraulic Pro Bow
Press. It's made by Dave Thomas and his company in rural
Iowa. Their attention to detail and commitment to quality
make this a bow press that you can have confidence in - I have
enough confidence in it that I am using it at the shop.
My experience with the bow press - I got the
bow press in the shop and out of the box. There is very
little to assemble out of the box, so that is a definite plus
for many people. The components are well made and the
directions are easy to follow. Putting a bow in the press
was a little different from what I was used to at first, but
after figuring out the bungee cords, it was a breeze. I
pressed a Pearson Z-34 and Z-32 to see how easy the press is to
adjust and how it will press parallel limb bows. The press
operates differently from others because it uses no downward
force. The press uses inward force to put the pressure on
the bow limbs. This is a definite advantage, as it pressed
the Pearson Z-34 and Z-32 very easily. I also pressed a
Reflex Ridgeline 34 with Alphashox. This is one of the
only bow presses that I have used that allows me to keep in the
Alphashox. For those that have taken these in and out of
bows, this is simply a Godsend. Overall, I am very
impressed with this bow press and I am proud to support the
Thomas family by selling these bow presses.
The new hydraulic jack has 10" of travel, so
it is more than enough to completely disassemble any bow on the
market. If you have been looking for the best bow press
available, you have found it!!
 |
Slick
Trick - One of the hottest broadheads out on the market
is the Slick Trick 4 blade broadhead.
